SD-WAN over Satellite Testing No ratings yet.

Staff Contributor

Staff Contributor

VIEWS

SD-WAN is at the leading edge of software-based networking deployments. It offers significant business value for organizations in terms of business agility and the ability to leverage Internet bandwidth economics. The question was asked how well SDWAN will perform over a Satellite network. We tested SD-WAN to show that this was possible and that SD WAN can be used over a Satellite network.

What is SD-WAN

SD-WAN is an acronym for software-defined WAN and is used in a wide
area network. SD-WAN simplifies the management and operation of a WAN by
decoupling the networking hardware from its control mechanism. It allows
companies to connect remote branch offices to data centres and each other and
deliver the applications and services required to perform business functions.

A key application of SD-WAN is to allow companies to build higher-performance WANs using lower-cost and commercially available Internet access, enabling businesses to partially or wholly replace more expensive private WAN connection technologies such as MPLS.

SD-WAN replace traditional branch routers with products that
simplifies the setup process and providing zero-touch deployment.
Products can be physical appliances or virtual appliances. A centralized
controller is used to manage and configure the network and set policies
and prioritize traffic

A SD-WAN appliance is basically a combination of traditional routers, firewalls, cashing server and WAN optimisation build into one appliance. It uses VPN type technology to create a virtual network over Internet links or other connectivity methods, and use policies to route traffic over specific tunnels or use redundancy methods to reroute traffic in case of link failure.

Using a SD-WAN solution provide benefits that simplify management, gives business agility, utilises more cost-effective links, improves the user experience and increase security.

SD-WAN over Satellite

Because the
SD-WAN solution builds tunnels, with IPsec encryption for security, over the
WAN links, these tunnels will negate the optimization techniques provided by
the Satellite platform as seen with normal VPN links.

Therefore, the
SD-WAN equipment will need to provide functionality to enhance the user
experience and provide a business-like quality to the WAN.

Testing of SD-WAN

The following picture show the network topology used for the tests conducted.

Network Setup:

On the remote site, an iDirect modem was used, connecting to the SD-WAN appliance with a PC behind it. L2oS (Layer2 over Satellite) was configure from the modem to the HUB. From the HUB, traffic was sent over a backhaul link, also on Layer2, to Teraco. In Teraco the traffic was handed over to the client’s network over a Layer2 interconnect. The VSAT link was configured as 500kbps/2.5Mbps (Uplink/Downlink).

This established a Layer2 connection end-to-end, from the SD-WAN
appliance at the remote site to the SD-WAN appliance in the client’s
core network, and allowed them to setup a PPPoE connection between the
SD-WAN appliances. iPerf was used to establish a TCP session between the
end-points and generated the traffic that we monitored during the tests
to provide the statistics below.

Test 1 – Bench mark test

The first test was done just over the L2oS link, without any SD-WAN
functionality configured. This was to establish a bench mark for normal
traffic over VSAT where the VSAT link was doing the acceleration and
optimization of the traffic.

Test 2 –
PPPoE, without L2TP

Next PPPoE was enabled between the SD-WAN equipment, but this showed a
big reduction in performance. The PPPoE results only showed
550kbps/1.25Mbps which was worse than expected.

The main reason for the degradation is that the traffic is now inside
a tunnel and the VSAT equipment cannot optimize the traffic anymore,
therefore the change in colour on the graph from blue to orange. The
colour change show that the traffic type changed from Reliable (TCP) to
Unreliable traffic (Non TCP).

Test 3 – L2TP over PPPoE

Then standard SD-WAN configuration was applied which uses a L2TP
tunnel inside the PPPoE and the SD-WAN appliances now performed the
traffic optimization on the link. Only download was tested and a rate of
2.1Mbps was achieved which was better than normal PPPoE connection.

When multiple connections were opened, we found this value increased to 3Mbps.

Downstream QoS

The Downstream
QoS results correlate with the Remote Sat traffic statistics. The spike to
4Mbps (showed in the red square in Graph 4) was achieved when 5 parallel
iPerf streams were opened.

The average Platform utilization was around 6.5Mbps and the max achievable
utilization for the platform is 9Mbps, which left 2.5Mbps open for the test.
The results with the SD-WAN on L2oS was around 2 – 2.5Mbps, which means that SD-WAN
on VSAT performance is about 10-15% less than standard VSAT performance.

One thing that
was noticed, was that the keep alive requests needed to be prioritize in the
L2tP tunnel, or else the link would flap. Unfortunately, this is not something that
can be configured on the iDirect side, because the traffic is encrypted, so the
HUB will not be able to identify the keep-alive in order to prioritize the
packet. This was tested during testing and it worked perfectly.

Conclusion

The theory is
that the UDP nature of the L2TP did not affect the acceleration of the iDirect
platform and that L2tP can handle TCP window scaling better than PPPoE. If a
site opens multiple TCP sessions over the link, the site will be able utilize
the max MIR of the VSAT link.

Even without
compression and caching on the SD-WAN configuration, the acceleration over the
L2TP tunnel created by the SD-WAN configuration, proved to be very good and a
single TCP session showed only 10-15% less throughput. With only a couple of
sessions over the SD-WAN link, the full bandwidth could be utilised.

The post SD-WAN over Satellite Testing appeared first on Q-Kon Africa.

Please rate this

Join the conversation

LATEST ARTICLES

Apex Business Intelligence

Share this page

PROVIDERS

SUGGESTION BOX - HELP US TO SERVE YOU BETTER

PICK A CATEGORY

Categories

FOLLOW US ON TWITTER

Shares
0
ARE YOU READY? GET IT NOW!
Subscribe to get latest update.
Your Information will never be shared with any third party.